BOTTOM END AND CASE VALVE TRAIN AND HEADS
INTAKE, EXHAUST & TIN FINAL ASSEMBLY
THE INTAKE WILL BE A CUSTOM BUILT INTAKE MANIFOLD
TEAMED WITH A SOLEX 40-P11. WE WILL USE A MERGED
HEADER EXHAUST. WE HAVE A BOSCH BLUE SCREAMER KIT.
WE HAVE VINTAGE BOLT ON VALVE COVERS, A 12 VOLT
GENERATOR, AND A POWER PULLEY.
__________________________________________________________________
THIS SOLEX 40 P-11 WAS BEAUTIFULLY THE GUYS AT ACE ALSO MADE THE CUSTOM
RESTORED BY DAVE AT ACE. THROTTLE CABLE GUIDE/VELOCITY STACKS
CARBURETOR TOPPER.
ALL FITTINGS WERE REMOVED, CLEANED HERE IS A BARE 40 P-11 THAT WE CAN
AND ZINC PLATED THEN REINSTALLED. PLAY WITH LATER ON.
HERE YOU CAN BETTER SEE THE THROTTLE 40MM THROTTLE BODIES SHOULD HELP BRING
CABLE GUIDE. MUCH MORE FUEL/AIR TO THE ENGINE.
THESE VINTAGE BOLT-ON VALVE COVERS THEY ARE IN IMMACULATE CONDITION AND
WERE A REAL FIND. CLEANED UP GREAT WITH SOME ELBOW GREASE.
THESE COVERS HAVE CAST IN AREAS THAT 5" POWER PULLEY.
WE CAN TAP TO ACCEPT SOME BREATHERS.
WE ORDERED THIS DEEP SUMP FROM THIS IS A 6 VOLT SIZED 12 VOLT.
GENE BERG ENTERPRISES.
THIS 019 BLUE SCREAMER DISTRIBUTOR DONNY CASSIDY AT ACE FABRICATED THIS
WAS RESTORED BY FELLOW 36HP ONE OFF CUSTOM BREATHER BOX FOR US
CHALLENGER ED FALL.
THIS BOX WILL MOUNT ON THE FIREWALL DONNY WELDING THE BOX TOGETHER
ON THE LEFT HAND SIDE
FINISHED BREATHER BOX A VIEW OF THE FRONT
STARTING FABRICATION ON THE INTAKE CLOSE CLEARANCES BETWEEN THE MANIFOLD
MANIFOLD AND THE FAN SHROUD
A VIEW OF THE 3 & 4 END CASTING ANOTHER VIEW OF THE 3 4 END CASTING
DAVE HOGARTH WORKING ON THE CUSTOM CENTER BRACE FOR THE INTAKE MANIFOLD
INTAKE
THE 1 & 2 END CASTING CLOSE CLEARANCES UNDER THE GENERATOR
A VIEW WITH THE MANIFOLD MOCKED UP THE EXHAUST WAS MODIFIED TO FIT THE
36HP BLOCK
SECTIONS WERE ADDED IN OR TAKEN OUT VIEW OF THE FITMENT FROM ABOVE
DEPENDING ON FIT
WATER TANK FOR RAINSTORM WATER PUMP FOR WATER ASSISTED COOLING
ASSISSTED COOLING (WAY AWESOME)
DISTRIBUTION BLOCK FOR COOLING ASSIST